MouseButtonTest
EN
Free · no download · works instantly

Gamepad Tester

Plug in your controller and press any button. Every button, trigger and stick lights up live – and the tester measures stick drift for you.

Press any button on your controller
Connect it by USB or Bluetooth – the browser only sees a controller after a button press.
Works with Xbox, PlayStation, Switch Pro and most PC gamepads.
Controller
–
Buttons tested
–
Left stick
–
Right stick
–
Left drift
–
Right drift
–
Raw buttons and axes
Buttons
Axes

How to test your controller

1. Connect it

Plug the controller in by USB or pair it by Bluetooth, then press any button – browsers only show a controller after the first press.

2. Press every button

Each button turns colored once it works. Pull both triggers slowly – the bar should fill smoothly from 0 to 100%.

3. Let the sticks rest

Move each stick in a full circle, then let go. After a second the tester shows how far the stick rests from the center – that's the drift.

What is stick drift?

Stick drift is when an analog stick reports movement while you aren't touching it – your camera slowly turns or your character walks on their own.

It happens when the stick's sensors wear out or get dirty, so the resting position is no longer read as zero. A resting offset under 5% is normal and every game hides it with a dead zone. Between 5% and 12% it's slight drift; above 12% most games will start to react to it.

Common controller problems and fixes

  1. A button doesn't light up. Test it a few times. If it never registers, the contact under the button is dirty or worn – cleaning with isopropyl alcohol often helps.
  2. Stick drift. Blow compressed air around the stick base and move it in circles, recalibrate it (Windows: “Set up USB game controllers” → Properties → Settings → Calibrate, where available), or raise the dead zone in your game.
  3. The controller isn't detected. Press a button – browsers wait for one. Try another USB cable or port, re-pair Bluetooth, and close apps like Steam that may take over the controller.
  4. Triggers don't reach 100%. Recalibrate the controller. On some pads, trigger stops or worn sensors limit the travel.
  5. Buttons show in the wrong place. The controller isn't using the standard layout in this browser. Open “Raw buttons and axes” to see its own numbering, or try Chrome or Edge.

Which controllers work?

ControllerChrome / EdgeFirefoxVibration test
Xbox One / SeriesYesYesChrome, Edge
PlayStation DualShock 4 / DualSenseYesYesChrome, Edge
Nintendo Switch ProYesPartlyNo
Generic PC / XInput gamepadsYesYesOften

The tester runs entirely in your browser – nothing is installed and nothing is sent anywhere.

Frequently asked questions

Why doesn't my controller show up?

Browsers only reveal a controller after you press a button on it, for privacy. Press any button with this page open. If it still isn't found, try another cable or USB port, and make sure the controller works in Windows or macOS.

How much stick drift is normal?

A resting offset up to about 5% is normal and hidden by every game's dead zone. 5–12% is slight drift; above 12% it usually becomes noticeable in games.

Can stick drift be fixed?

Often, yes: clean around the stick with compressed air or isopropyl alcohol, recalibrate it, or raise the in-game dead zone. If the drift comes back quickly, the stick module is worn and needs replacing.

Does this work with PS5 and Xbox controllers?

Yes – DualSense, DualShock 4 and Xbox controllers work in Chrome, Edge and Firefox, by USB or Bluetooth. Vibration testing works in Chrome and Edge.

Does the gamepad tester work on a phone?

On Android with Chrome, yes – connect the controller by Bluetooth or USB-OTG. iPhone and iPad support depends on the browser.

More tests